Buffer

PH value of the solution can be molybdenum plating within a substantially constant material. Mobile Cathode:
Using mechanical means parts to be plated together with the electrode bar is periodically reciprocated cathode.is not continuous film of water:
Generally used for surface unevenness caused by contamination wettability, the water film on the surface becomes discontinuous.Porosity:
The number of pinholes per unit area.pinhole:
Up from the bottom surface of the cover layer of the coating or matrix metal micro channel, which is due to certain points on the surface of the cathode electrodeposition processes are obstacles so that it can not learn the coating product, which has been thickened around the resulting coating.color:
Caused due to corrosion of the metal coating surface or change of color (eg, dark, pale, etc.).binding force:
Coating the base material with the strength. Can be used to separate from the coating and the substrate to measure the force required from the skin it 55:
Coating the base material into a sheet from the phenomenon.sponge-like coating:
Formed during the plating of the base Molybdenum crucible of the porous solid with no sediment.charred Plating:
Formed under high currents in the color of dark, rough or poor quality loose sediments, which often contain
Oxides or other impurities.Ma points:
The plating and etching, the metal surface to form a pit or hole.
Brazing coating 59:Hard Chrome:
Refers to the base material in a variety of thick layer of chromium plating purposes. In fact, its hardness is not better than decorative hard chromium layer, such as the coating is not bright decorative chrome plating rather than soft. Because of its thick coating can play its high hardness, wear characteristics, so called hard chrome plating.
Immiscible liquids can reduce the interfacial tension between, so that the formation of the emulsion material.complexing agent:
With the metal ions or compounds containing metal ions form a complex with the substance.Insulation:Applied to the electrodes or a part rack, so that the parts of the surface layer wetting agent:
Parts can reduce the interfacial tension between the solution, the workpiece surface is easy to be wetted substances.Additives:
Contained in the solution can be improved electrochemical performance or improve the quality of the solution a small amount of additives.